Table of Contents
Advertisement
The unit starts running and the program is loaded from the CD ROM.
"Loading CD-ROM" is displayed while loading. The loading is completed
within about 3 minutes and the status in which the same CD ROM and
Memory Stick were last used is recalled.
REVERB display
1
I 48
REVERB
6
1 Input meter: Shows the level of the active channel only. (e.g. When
Rev mode is Mono (1) in Stereo out, it shows the level of channel 1
only. No indication for channel 2.)
2 Cache memory number (1 to 9)
3 Rev mode (set on the SETUP display)
4 Direct/Rev mode (set on the SETUP display)
5 Speaker and mic arrangement for sampling:
directional mic), x or X (Uni-directional mic)
6 REVERB display indicator
7 Clock indicator (set on the SETUP display): I (Internal), W (Word),
D (AES (DI)), 44.1 (44.1 kHz), 48 (48.0 kHz), 88.2 (88.2 kHz), 96
(96.0 kHz)
8 Reverb program (set with the F2 key on the REVERB display)
9 Speaker and mic arrangement for sampling: Speaker position C
(Center), L (Left), R (Right), Mic position 1 to 6
For details, see the explanation on the CD ROM jacket.
0 Delay time (set with the F3 key on the REVERB display)
qa Reverb time (set with the F4 key on the REVERB display)
Removing/inserting the Memory Stick
To remove the Memory Stick, press the EJECT button on the PC card
adapter. To use the Memory Stick again, reinsert it into the slot of the PC
card adapter.
2
Note
Do not remove the Memory Stick or the PC card adapter during the
operation of the DRE-S777. If you did, it might damage the data stored in
the Memory Stick. You can remove them in the following cases only:
— when the power is turned off,
— when "Eject CD/MS" is selected on the SETUP display, or
— when "Please change CDROM/MS" or "Please change licence MS"
appears.
2 3
4
1
Mono D+Rev
[Medium Hall A] PreDelay
[1:C12
] [ 0.00ms] [
78
9
0
(Speaker), + (Omni-
1
Chapter 3 Operation
5
O
O
RevTime
2.4s]
qa
21
Hide quick links:
Advertisement
Table of Contents
