Reverb Display; Selecting The Reverb Program - Sony DRE-S777 Operating Instructions Manual

REVERB Display

Selecting the Reverb Program

1
Loading the reverb program from the CD ROM
22
Chapter 3 Operation
F1 key F2 key
F1 F2
F3 key
To load the reverb program recorded on the CD ROM, proceed as follows:
1
Press the F1 key to show the REVERB display.
1
Mono D+Rev
I 48 [Medium Hall A] PreDelay
REVERB [1:C12
2
Press the F2 key.
The F2 key lights in green.
3
Turn the jog dial until the desired reverb program is displayed.
The F2 key flashes in green.
Cache memory number
1
Mono D+Rev
I 48
[Medium Hall B] PreDelay
REVERB [1:C12
Reverb program indicator
For the reverb program options, see the CD ROM jacket.
4
Press the F2 key.
The F2 key stops flashing and lights. The selected reverb program is
loaded from the CD ROM to the cache memory. "Loading CD-ROM"
is displayed while loading. When loading is completed, the F2 key
turns off.
Jog Dial
F3 F4
F4 key
RevTime
] [ 0.00ms] [
RevTime
] [ 0.00ms] [
O O
2.4s]
O O
0.0s]