Display Annunciators - Agilent Technologies U8001A User's And Service Manual

2 General Information

Display Annunciators

Memory State 3
Memory State 2
Memory State 1
Annunciators
M1
M2
M3
OVP
OCP
LOCK
LIMIT
OFF
CV
CC
10
Functions
Stores states of power supply in non-volatile memory
When the power supply is in calibration mode, it can be used to store calibration
constant.
The over voltage protection function is enabled when the annunciator turns on or the
over voltage protection circuit has caused the power supply to shutdown when the
annunciator blinks.
The over current protection function is enabled when the annunciator turns on or the
over current protection circuit has caused the power supply to shutdown when the
annunciator blinks.
The front panel operation is disabled
The display shows the limit values of voltage and current.
The output of the power supply is disabled.
The power supply is in constant voltage mode when the annunciator blinks.
The power supply is in constant current mode when the annuciator blinks
Over voltage Protection
Over current Protection
LOCK
Limit
U8001A/U8002A User's and Service Guide
OFF
Constant Voltage
Constant Current