Table of Contents
Advertisement
Display Annunciators
Adrs
Power supply is addressed to listen or talk over a remote interface.
Rmt
Power supply is in remote interface mode.
+6V
Displays the output voltage and current for +6V supply. Knob is active for
+6V supply.
+25V
Displays the output voltage and current for +25V supply. Knob is active for
+25V supply.
-25V
Displays the output voltage and current for -25V supply. Knob is active for
-25V supply.
CAL
power supply is in calibration mode.
Track
The outputs of +25V and -25V supplies are in track mode.
Limit
The display shows the voltage and current limit value of a selected supply.
ERROR
Hardware or remote interface command errors are detected and also the
error bit has not been.
OFF
The three ouputs of the power supply are disabled.
Unreg
The displayed output is unregulated (output is neither CV nor CC).
CV
The displayed output is in constant-voltage mode.
CC
The displayed output is in constant-current mode.
To review the display annunciators, hold down
turn on the power supply.
key as you
Display Limit
5
Advertisement
Table of Contents
