Listen to the Radio
1. Set the volume to the lowest setting.
2. Plug the earphones into the
earphone jack.
3. Press POWER ON/OFF to switch to
radio mode and use VOL +/– to
adjust volume.
4. Press BAND to choose AM or FM.
5. Press TUNE + / HOUR or
TUNE – / MINUTE to find a radio
station. Hold down briefly for auto scan.
n
Note:
• When listening to FM stations, press
STEREO/TIME SET to select stereo or
mono mode. STEREO appears on the
display in stereo mode.
• For best FM reception, listen in mono
mode and fully extend the
earphone cord.
• The AM antenna is built-in; position the
radio to improve reception.
7