GE PGS908 Technical Service Manual page 20

The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
NOTE: The surface burners must be turned off
prior to the self-clean start time.
Touch the SELF CLEAN LO/STD pad
once for a 4-hour (3-hour on some
models) clean time or twice for a
3-hour (4-hour on some models)
clean time.
A 3-hour self-clean time is
recommended for use when
cleaning small, contained spills. A
self-clean time of 4 hours or longer
is recommended for a dirtier oven.
If a time other than 4 hours or
3 hours is needed, use the number
pads and enter the desired clean
time.
You can change the clean time to any
time between 3 hours (2 1 ⁄ hours on some
2
models) and 5 hours, depending on how
dirty your oven is.
Touch the DELAY START pad.
Using the number pads, enter the
time of day you want the clean cycle
to start.
Touch the START pad.
– 20 –
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED light
goes off.
When the LOCKED light goes off, you will
be able to open the door.
On models with Range Lock-Out,
touch and hold the RANGE LOCK-
OUT pad for 3 seconds to turn it off.