I/O Panel - ASROCK P55 Extreme User Manual

1.7 1.7 1.7 1.7 1.7

I/O Panel

I/O Panel I/O Panel I/O Panel I/O Panel
1
2
17
18 16
1 PS/2 Mouse Port (Green)
2 Coaxial SPDIF Out Port
3 USB 2.0 Port (USB6)
4 IEEE 1394 Port (IEEE 1394)
* 5 LAN RJ-45 Port
6 Side Speaker (Gray)
7 Rear Speaker (Black)
8 Central / Bass (Orange)
9 Line In (Light Blue)
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
LAN Port LED Indications
Activity/Link LED
Status Description
Off No Link
Blinking Data Activity
On Link
**
If you use 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack".
See the table below for connection details in accordance with the type of speaker you use.
TABLE for Audio Output Connection
Audio Output Channels Front Speaker Rear Speaker
2
4
6
8
To enable Multi-Streaming function, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find "Mixer" tool on your system.
Please select "Mixer ToolBox"
"ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed to select "Realtek HDA
Primary output" to use Rear Speaker, Central/Bass, and Front Speaker, or select "Realtek
HDA Audio 2nd output" to use front panel audio.
3 4
15 14 13
** 10 Front Speaker (Lime)
11 Microphone (Pink)
12 USB 2.0 Ports (USB45)
13 USB 2.0 Ports (USB23)
14 USB 2.0 Ports (USB01)
15 Powered eSATAII/USB Connector
16 Optical SPDIF Out Port
17 Clear CMOS Switch (CLRCBTN)
18 PS/2 Keyboard Port (Purple)
SPEED LED
Status Description
Off 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
(No. 10) (No. 7)
V --
V V
V V
V V
, click "Enable playback multi-streaming", and click
1 3 1 3 1 3
1 3 1 3
5
6 9
7 10
8 11
12
ACT/LINK
SPEED
LED
LED
LAN Port
Central / Bass Side Speaker
(No. 8) (No. 6)
-- --
-- --
V --
V V