Advanced Screen - ASROCK P55 Extreme User Manual

VTT Offset Voltage
Use this to select VTT Offset Voltage. Configuration options: [Auto],
[1.114V] to [2.044V]. The default value is [Auto].
PCH Voltage
Use this to select PCH Voltage. Configuration options: [Auto], [1.066V] to
[1.488V]. The default value is [Auto].
CPU_PLL Voltage
Use this to select CPU_PLL Voltage. Configuration options: [Auto],
[1.812V] to [2.324V]. The default value is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.
3 . 4 3 . 4 3 . 4

3 . 4 Advanced Screen

3 . 4 Advanced Screen Advanced Screen Advanced Screen Advanced Screen
In this section, you may set the configurations for the following items: CPU Configuration,
Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP Configuration,
Floppy Configuration, SuperIO Configuration, and USB Configuration.
Main OC Tweaker
Advanced
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.
CPU Configuration
Chipset Configuration
ACPI Configuration
Storage Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
BIOS Update Utility
ASRock Instant Flash
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
ASRock Instant Flash
ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This
convenient BIOS update tool allows you to update system BIOS without
entering operating systems first like MS-DOS or Windows
this tool and save the new BIOS file to your USB flash drive, floppy disk or
hard drive, then you can update your BIOS only in a few clicks without
preparing an additional floppy diskette or other complicated flash utility.
Please be noted that the USB flash drive or hard drive must use FAT32/16/
BIOS SETUP UTILITY
H/W Monitor Boot Security
Options for CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
5 9 5 9 5 9
5 9 5 9
Exit
® . Just launch