Pro-Form PCTL04509.0 User Manual page 10

8. Insert the end of the Upright Wire (79) into the
bottom of the Right Handrail (104) and pull it out
of the hole in the side of the Right Handrail.
Slide the Handrail Caps (105) onto the lower
ends of the Right Handrail (104) and the Left
Handrail (107). Then, insert the brackets on the
Handrails into the tops of the Uprights (75, 80).
Remove the wire tie from the Upright Wire (79).
9. Attach the Right Handrail (104) and the Left
Handrail (107) with six 5/16" x 1" Bolts (6) and
four 5/16" Star Washers (13) as shown. Do not
fully tighten the Bolts yet.
Slide the Handrail Caps (105) away from the
Uprights (75, 80). Attach the lower end of each
Handrail (104, 107) to the Uprights with a #10 x
3/4" Screw (5).
Orient the Handrail Caps (105) as shown.
Attach a Handrail Cap to each Handrail (104,
107) with a #8 x 1/2" Screw (2).
8
105
9
6
13
6
107
75
105
2
5
10
107
Hole
79
75
Wire
Tie
Bracket
105
6
13
104
80
2
5
104
80
6
105