B.
Troubleshooting
•
NOTE: This is the default address. If you've changed it, you
must type the new one. If you've forgotten the address, read
on. Otherwise, skip to step 3.
Follow these steps to access the Console:
1.
2.
85
Connect to your private network (MyPlace).
Type the following in your browser's address bar:
192.168.10.1
2.1.
Click Start>Run, as shown in the figure.
2.2.
In the Run dialog box, you must type the
command cmd and then press Enter. This will open
a Command shell window like the one shown in the
figure.
B Troubleshooting