Fon LA FONERA User Manual page 22

4. Install La Fonera
3.
on the right side of the previous figure. By default, one
of them will appear as MyPlace and the other one as
FON_AP. The first one, MyPlace, is your private network's
default name. FON_AP is the default name for your public
network. You will be able to change both networks' names
later. If you still can't see the FON signals, check that
you've installed La Fonera correctly. If you only see the
private signal (MyPlace), refer to section 4.4.3 and check
the next steps you need to take.
If the problem persists and you can't connect to La
Fonera, contact us at support@fon.com.
You need to register your La Fonera the first time you
connect it. You must use the public network first (FON_
AP) by double clicking the signal shown in the figure.
4.
the figure warning you that the network you're connecting
to is public and doesn't have a key. Click the Connect
Anyway button to continue the process and register La
Fonera.
22
At this point you should see at least two networks
You might see a dialog box like the one shown in
4. Install La Fonera