A.1. Introduction - Fon LA FONERA User Manual

A. Configure La Fonera

A.1. Introduction

The Management Console is used for managing La Fonera's
configuration parameters. You don't need to access it unless
you wish to make changes or if your network requires
manual configuration, since it may require you to have
some technical knowledge. We will explain all the options in
a simple way, but if everything is OK, you shouldn't need to
make any changes.
A.2. How to access the interface
To gain access to the Management Console you must first
be connected to the private signal (SSID) which is very
easy to recognize. You've got access to two networks: one
of them is named MyPlace and represents your private
network and the other one, prefixed with the "FON_" string
(FON_AP unless you've changed it), is the public one.
Follow these steps to access the Console:
1.
2.
• NOTE: This is the default address. If you've changed it, you
must type the new one. If you've forgotten the address, read
on. Otherwise, skip to step 3.
44
Connect to your private network (MyPlace).
Type the following in your browser's address bar:
192.168.10.1
2.1. Click Start>Run, as shown in the figure.
A Configure La Fonera