Fon LA FONERA User Manual page 56

A. Configure La Fonera
• Channel: This drop-down menu lets you to choose the
• B/G Mode: This drop-down menu lets you choose the
A.8.3. Firmware upgrade
You can update La Fonera's firmware in this section. As
we've described before, this process is fully automated,
so you won't need to refer to this section unless you have
problems with La Fonera or have been told to do so by our
technical service. You might see a prompt in your user zone
about this issue, where we'll remind you the following steps
of the process:
56
channel that will be used to send your WiFi signal.
WiFi devices can function through several channels,
similar to the way walkie-talkies do. The choice of one
channel over another is determined by possible channel
interferences or saturations. Its default state is Automatic,
and we advice that you leave it this way as La Fonera
will select the best channel available.
WiFi protocol you wish to use. The main difference is the
transmission speeds at which users can connect to La
Fonera. Early devices that are WiFi compatible use the B
mode, which is slower in data transfer. Subsequently, the
next generation of devices uses the G mode. We advice
you to always keep the default mode, Mixed B/G, as both
modes will be available. With this option you ensure
compatibility with all the WiFi devices trying to connect
to your signal.
A Configure La Fonera