Fon LA FONERA User Manual page 53

A. Configure La Fonera
• IMPORTANT NOTE: The only data that will change in this field
is the IP Address. Here you must take into consideration all the
devices that connect to your network, as they can also have
a static IP. There's only one condition: the IP address you
type can't be the same as the one used for another device. An
easy way to avoid the conflict is for you to locate the device
with the highest IP and add 1 to it (the maximum is 254).
For example, if the IP for a device is 192.168.10.156, a valid
value for this field would be 192.168.10.157.
A.7.3. PPPoE (point-to-point protocol
over Ethernet)
This protocol is very often used by Cable ISPs. If you
have this type of connection, you'll need to enter
some information into the available fields. You can get
this information from your ISP, so search through the
information they've sent you or get in touch with them to
obtain it.
A.7.4. PPTP
If you have a PPTP connection, you must enter some
additional information in the preceding section: the IP
address of the ISP server that provides you this kind of
connection. You can also obtain this information directly
from our ISP.
53 A Configure La Fonera