Fon LA FONERA User Manual page 45

A. Configure La Fonera
3.
4.
A.3. Router status
The next figure shows the Status Screen which you will
first see when you connect to the Management Console. It
summarizes your La Fonera's configuration. You have the
option of modifying all sections in the Management Console,
although we'd like to stress that you needn't make changes
if everything works out of the box for you, meaning that
you can see both, the public and the private, signals of
your La Fonera and can connect to Internet through them.
Because some of the fields shown in the figure can change
depending on the connection you have and some aspects of
the configuration, we'll focus on those that are common and
we'll see the rest as we examine the other fields.
45
2.2. In the Run dialog box, you must type the
command cmd and then press Enter. This will open
a Command shell window like the one shown in the
figure.
2.3. In this window, you must type the command
ipconfig and then press Enter to access your
network configuration. What you see must be
similar to the previous figure. You must locate
the highlighted area (locate the Wireless Network
Connection section and take note of the numbers that
appear next to Default gateway). As you can see in the
previous figure, it's the default address.
Now you should be able to see the Management console.
You will be asked for your Username and Password. The
default values are Username=admin, Password=admin.
A Configure La Fonera