Attaching The Table-Top Stand - Sony Bravia KDL-22EX350 Operating Instructions Manual

Attaching the Table-Top Stand

• Refer to the supplied stand leaflet for proper attachment.
1
Place the TV with its screen facing down on a level and stable surface covered with
a thick and soft cloth.
2
Fix the TV to the stand according to the arrow marks
using the supplied screws.
* Be careful not to hit the Table-Top Stand against the edge of
the surface when attaching it.
• To detach the Table-Top Stand from the TV, remove the screws guided by the arrow mark
the Table-Top Stand. Do not remove any other screws.
• Hold the Table-Top Stand with one hand to avoid it dropping when attaching.
• If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to securely tighten the supplied screws, otherwise the TV may fall down.
• Use an appropriate screwdriver to attach the screws tightly without damaging the screw head.
• Please ensure the AC power cord is away from the stand installation location when you attach
the stand.
• Do not touch the inner side of the bottom of the TV stand to avoid being hurt.
8
US
that guide the screw holes
Thick and soft cloth
on