Sony Bravia KDL-22EX350 Operating Instructions Manual page 62

Condition
No sound / Noisy sound
No sound but good
picture
Audio noise
No audio or low audio
with Home Theater
System
No color / Irregular
picture
BRAVIA Sync
Cannot find connected
BRAVIA Sync HDMI
device
Second A/V receiver is
not listed on the Device
List
PC Input
No picture / No signal
Poor Picture
62
US
Explanation/Solution
• Check the volume control.
• Press MUTING or VOL + so that "Muting" disappears from the
screen (see page 25).
• Set Speakers to TV Speakers in the Sound settings (see page
41). If it is set to Audio System, sound is not output from the TV's
speakers regardless of the TV's volume control.
• When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not provide an audio
signal.
• When tuned to a digital channel with Alternate Audio, the
broadcaster may not be broadcasting your preferred Alternate
Audio language. Press OPTIONS, highlight and select Alternate
Audio, and change the Alternate Audio language (see page
41).
• Make sure that the antenna is connected using a 75-ohm coaxial
cable (not supplied).
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged
antenna cable.
• Set Speakers to Audio System in the Sound settings (see page
41).
• Set Audio Out to Fixed in the Sound settings (see page 41).
• Verify that the Video1/Component Selection (see page 49) is
set to the current input type in use. We suggest leaving this
setting to Auto.
• Make sure that the Control for HDMI is set up on both the TV
and the optional device compatible with BRAVIA Sync (see
page 28).
• Only one A/V receiver may be used with the BRAVIA Sync and
Control for HDMI functions at one time (see page 50).
• Confirm the PC is correctly connected to the TV with either the
PC IN (with an HD15 cable) or with the HDMI IN.
• Ensure the output signal from the PC is one of the formats listed
on page 53.
• Turn the PC off. Confirm the PC connection and restart the PC.
Plug-and-play will auto-detect the TV and correctly set up PC
timing.
• Verify the PC is not in standby or hibernation mode.
• Adjust the resolution (see page 53).
• Adjust Pitch and Phase.