1: Attaching The Table-Top Stand - Sony Bravia KDL-55HX750 Operating Instructions Manual

1: Attaching the
Table-Top
Stand
Refer to the supplied Table-Top Stand leaflet for
proper attachment.
1
Place the TV set on the Table-Top Stand.
KDL-55/46/40/32HX75x,
KDL-46/40/32EX65x, KDL-32EX550
Guide
pins
KDL-40/32NX650
Guide
pins
~
• Align the TV from the top, slide it in until the
guide pins cannot be seen.
KDL-26EX550
2
Fix the TV to the Table-Top Stand using the
supplied screws. The arrow marks
indicate the location of the screw holes used
for securing the Table-Top Stand.
KDL-55/46/40/32HX75x,
KDL-46/40/32EX65x, KDL-32EX550
KDL-40/32NX650
KDL-26EX550
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
• The default position is at approximate 6°.
To change the angle to vertical position,
see page 8 (2: Adjusting the viewing angle of
the TV) (KDL-40/32NX650 only).
(Continued) 7
GB