Securing The Occupant - Invacare Orbit 1073955 Owners Operating & Maintenance Manual

SECTION 12—TRANSPORT READY OPTION

Securing the Occupant

Vehicle-Anchored Belts
NOTE: For this procedure, refer to FIGURE 12.2.
This wheelchair has an overall rating of "B" with regard to accommodating the use and
fit of vehicle‐anchored belts. This rating is scored as follows:
The test for Lateral Stability Displacement for Point (P) is shown in FIGURE 12.2. The
average test result for point (P) is 0.77‐inches (19.6 mm).
Test
Platform
Seating System
This wheelchair has been tested for seating in a motor vehicle with the factory
installed seating system only.
When feasible, wheelchair occupants should transfer into the vehicle seat and use
the OEM (Original Equipment Manufacturer) vehicle-installed restraint system.
Ensure that the factory installed seating system is secured to the wheelchair frame before
operation. Refer to the seating system owner's manual.
™
Orbit
RATING
A
B
C
D
Rear View
Point (P)
°
45
FIGURE 12.2 Vehicle-Anchored Belts
WARNING
DESCRIPTION
Excellent
Good
Fair
Poor
NOTE: Rear view of
wheelchair and human
surrogate secured on test
platform and tilted to 45
degrees.
80
Part No. 1073955