Invacare Orbit 1073955 Owners Operating & Maintenance Manual page 40

SECTION 5—FRONT RIGGINGS
Adjustable Footplate
NOTE: For this procedure, refer to FIGURE 5.15.
1. Remove the four mounting screws and washers that secure the existing heel loop to
the footplate.
2. Position the mounting holes of the new heel loop with the mounting holes in the
adjustable footplate.
3. Secure the new heel loop to the footplate with the four mounting screws and washers.
FIGURE 5.15 Replacing Heel Loop - Adjustable Footplate
™
Orbit
Mounting Screws
Washer
Heel
Mounting
Loop
Screws
40
Footplate
Part No. 1073955