The Two Modes Of Operation - Travis Industries 1080 CF Owner's Manual

The Two Modes of Operation

This fireplace uses both a wall switch and thermostat to control the fireplace.
NOTE: Whichever
component is operated last
controls the fireplace. If
you are using the remote
and you press any button on
the wall switch, the remote
is no longer in control of the
fireplace until a button is
pressed on the remote.
Manual Mode
In manual mode you can turn the fireplace on and off using either the thermostat or remote.
Simply press the "ON" and "OFF" buttons on either the wall switch or remote.
Thermostat Mode
While in thermostat mode, the remote will
monitor the temperature and turn the fireplace
on and off to meet the desired temperature.
To turn on Thermostat Mode:
Press the "MODE" button on the remote until
"ROOM" appears on the LCD display.
To turn off Thermostat Mode:
Press the "MODE" button on the remote until
"ROOM" no longer appears on the LCD
display.
Adjusting the Target Temperature of the Thermostat:
Make sure the remote is in thermostat mode. Hold down the "SET" button until the desired
temperature is displayed ( "SET TEMP" will be displayed on the LCD, indicating that the
thermostat temperature is being set). The thermostat may be set at any temperature between 45°
and 99° F. If the desired temperature is missed, simply hold down the button (the temperature
will scroll up to 99° then re-start at 45°).
NOTE: If the fireplace is in thermostat mode, and any button on the wall switch is pressed, the
remote will return to manual mode. Simply press any button on the remote to return control of
the fireplace to the remote.
WARNING: While in thermostat mode the fireplace will turn on and off to meet the temperature
demands of the remote. Do not place any items near the fireplace or conduct service without
removing the batteries and disabling the fireplace.
WARNING: If the remote is set to a high temperature the fireplace may remain on for an extended
period of time. This may be a concern to those using LP (propane).
© Travis Industries
Operation
NOTE: Whichever control is
operated last controls the
fireplace.
When the remote is in
thermostat mode the
word "ROOM" will
appear on the remote.
4090810
7
100-01194_003