Replacing Seat Positioning Strap - Invacare P9000 XDT Operating & Maintenance Manual

Replacing Seat Positioning Strap

NOTE: For this procedure, refer to FIGURE 8.4.
1. If necessary, remove the seat cushion from the seat upholstery.
2. Remove the two (2) rear phillips screws and washers that secure the seat upholstery
and seat positioning strap to the crossbraces.
3. Remove the two (2) halves of the seat positioning strap from the crossbraces.
4. Position the two (2) new seat positioning strap halves between the seat upholstery and
the crossbraces.
5. Reinstall the rear phillips screws and washers that secure the seat upholstery and seat
positioning strap to the crossbraces.
NOTE: Washer is positioned on top of seat upholstery.
6. If necessary, reinstall the seat cushion onto the seat upholstery.
Seat Positioning Strap
Part No. 1118386
Rear Phillips Screw
Washer
Crossbrace
FIGURE 8.4 Replacing Seat Positioning Strap
SECTION 8—SEAT AND BACK
Seat Upholstery
43 ™
P9000 XDT