Table of Contents
Advertisement
Record
6.1 Start Recording
Press "
Record" to start recording. System will display some information on screen.
Only EACH MODE can enlarge single channel to full screen display
• 1
Hard Disk Percentage Used
• 2
"
R
" Recording Symbol
• 3
Channel Numbers
• 4
Mode (QUAD or EACH)
• 5
Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
• 6
HDD Info. ([M] Master disk [S] Slave disk)
• 7
(M) Motion Triggered, (T) Continuous, (S) Sensor, (
• 8
When "*" show up beside date & time, it indicates system HDD overwrite.
6.2 Stop Recording
Press "
Stop" and system will prompt to input password. Only the correct password can stop the
recording process.
) No Record
14
Advertisement
Table of Contents
