Indicators - Mitsubishi Electric WD390U-EST User Manual

Indicators

This projector has two indicators, each of which shows the operation condition of the projector.
The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your
dealer.
Normal condition
POWER STATUS
Steady red
Blinking green
Blinking green
Steady green
Steady green
Abnormal condition
POWER STATUS
Steady green
or
Blinking orange
Steady red
Steady red Blinking green
Steady green Blinking green/red
Steady red Blinking red
Steady red Steady red
Blinking green/red
Steady
Blinking green/red
Blinking
STATUS indicator
Stand-by
Off
Lamp stand-by for power-off
Lamp stand-by for power-on
The power is on. (Normal condition)
Abnormal temperature
The protection circuit is working or the lamp is
in an abnormal condition.
The lamp operation time exceeds the time
elapsed until the lamp lifetime notice while the
power is on. (See page 59.)
The lamp operation time exceeds the time
elapsed until the lamp lifetime notice while the
power is off. (See page 59.)
The lamp operation time exceeds the time
elapsed until the lamp lifetime. (See page 59.)
The lamp cover isn't closed.
Off
Abnormal.
or
CONDITION
CONDITION
EN-65
POWER indicator
NOTE
The power cannot be turned on by pressing
the POWER button.
The power cannot be turned off by pressing
the POWER button.
POSSIBLE SOLUTION
out, then press the POWER button.
replace the lamp.
Replace the lamp.
Change with a new lamp if this problem
recurs.
Close the cover correctly.
Contact your dealer.