Mitsubishi Electric WD390U-EST User Manual page 61

Troubleshooting (continued)
No image appears on the screen. (continued)
Problem
The screen for
entering the password
appears.
"No signal" is
displayed.
Images are not displayed correctly.
Problem
Projected images are
shaking.
Projected images are
displaced.
Projected images are
distorted.
Projected images are
dark.
Projected images are
blurred.
Afterimages persist on
the screen.
White dots are seen
on projected images.
Black dots are seen
on projected images.
Fine streaks are seen
on projected images.
Projected images
become wavy.
Solution
 Enter the password or contact the person in charge of management of the
projector. (See page 55.)
wrong with the connected device.
external device is a notebook computer.)
terminals.
whether images are projected correctly. If images are projected correctly, use an RGB
signal amplifier along with the extension cord.
Solution
menu. (See page 24.)
in the Option menu.
Option menu.
page 9.)
 or  button on the remote control to eliminate flicker.
Brightness and Contrast in the Picture menu. (See page 30.)
page 9.)
This phenomenon is improved by keeping projecting an evenly bright image. (Such
"image burn-in" phenomenon where afterimages persist on the screen may occur if a
stationary image is kept displayed on the screen for a long time.)
small number of pixels may visibly or invisibly be persistent all the time, but they are
the screen or displace the focus a little.
the type of the DVD player, game console or computer you use. In such a case, you
can reduce such streak noise by enabling the LPF.
correctly because of the type of input signal. This isn't a product malfunction. In this
case, readjust the keystone so that the amount of keystone correction is as small as
possible.
Signal menu. (See page 24.)
EN-61