Mitsubishi Electric WD390U-EST User Manual page 46

Advanced display utilities (continued)
Starting the LAN Display System
2. Click the LAN Display System icon " " to execute
the program.
The program starts to search for projectors
automatically.
During searching for projectors, Searching icon
is displayed.
When a projector is found, the computer logs in
to the projector automatically and the computer
image is projected. The main user interface
appears on the computer screen.
When multiple projectors are found, the
following window appears on the computer
screen.
Select a projector and click [OK]. The computer
logs in to the projector and the computer image
is projected.
Important:
If the computer resolution is higher than 1280
x 800, a confirmation dialog for changing the
computer resolution is displayed. When [OK] is
selected, the computer resolution will be changed
according to the projected image. When [Cancel]
is selected, the computer resolution will not
be changed and the projected image size will
be smaller than the screen size. The computer
resolution will be automatically recovered after the
LAN Display System is ended.
Operating the LAN Display System
3. Click the buttons on the main user interface to
operate the projection.
Freeze button
Stop button
Play button
Split 1 button
Split 3 button Split 4 button
Play button:
Projects the image in full screen.
Menu button
Exit button
Split 2 button
Split 1-4 buttons:
Click either of the buttons to project the image
on relevant split screen.
Stop button:
Stops the projection.
Freeze button:
Freezes the projected image.
Menu button:
Displays the menu window. (See the next step
for details.)
Exit button:
Exits the LAN Display System.
4. Click the Menu button on the main user interface to
display the menu window and select functions.
Search Server
Searches for the projectors on the network.
If this function is selected, the LAN Display
projection will quit automatically.
Chooses the computer screen to be projected,
main screen or virtual extended screen which is
activated by computer's virtual display function.
Main screen
Important:
Virtual display function is only supported by
Windows XP.
attached Virtual display driver must be
installed.
Hides or displays the main user interface on the
projected image.
MirrorOp Receiver
Launches (or stops) SidePad.
Enables or disables balloon tips and pop-up
windows.
EN-46
Menu window
Virtual extended screen