Mitsubishi Electric WD390U-EST User Manual page 50

Advanced display utilities (continued)
3. Select the PPT file you want to convert, and click
[Open].
name appears.
4. Set the file destination and the name.
The converted file is stored in the same folder as
original file by default.
The name of the converted file is the same as
original file's by default.
5. Click [OK] to start conversion.
6. When the conversion has been completed, click
[OK].
Important:
display can be converted. However, the followings
are not supported.
repeat setting
a single movement
setting
Connection
Connect a USB device to the USB-A terminal on the
projector.
AUDIO AUDIO IN-3L S-VIDEO SERIAL
IN-1
AUDIO OUT
AUDIO
IN-2
AUDIO IN-3R
MONITOR OUT
VIDEO
Important:
with USB 2.0.
Do not use a USB hub for the connection.
COMPUTER / COMPONENT VIDEO
USB-A LAN
USB-B
IN-1
IN-2
To USB-A
terminal
USB device
(option)
Performing the PC Less Presentation
Selecting a PC Less Presentation input
1. Press the VIEWER button on the remote control or
the COMPUTER button on the projector.
button, the input source is switched between
Computer1, Computer2, HDMI, LAN Display,
USB Display and PC Less Presentation.
When the PC Less Presentation input is selected,
the PC Less Presentation screen appears.
Setting up
2. Press the  or  button on the remote control to
select Setup and press the ENTER button .
The Setup screen appears.
3. Press the  or  button to select a setting item
and press the  or  button to change the setting.
AutoRun:
Enables or disables the AutoRun and slideshow
function.
OFF
PtG
Photo
Interval:
Sets the interval for PtG pause mark or photo
slideshow to 5/10/30/60/300 seconds.
Repeat:
Enables or disables the repeat execution of AutoRun
and slideshow function for photo files and PtG file.
Sorting:
Sets the file sorting rule to File Name
(Ascending), File Name (Descending), Time (New
to Old) or Time (Old to New).
4. To return to the PC Less Presentation screen, press
the ENTER button.
EN-50
the COMPUTER
AutoRun Slideshow
Disables. Disables.
Enables for PtG Enables for all
files. files.
Enables for JPEG Enables for all
files. files.