Dual Radiant Element; Haloring Element (Arhsc8750) - Amana ARTSC8650 Series Owner's Manual

Dual Radiant Element

Dual Element can be operated using inner 6 inch element
only or both inner and outer 9 inch element.
To use inner element
1. Depress Element Size switch downward. Dual Element
switch is located in upper right corner of control
panel.
E LE M E N T S IZ E
2. Push in and turn surface element control to desired
setting.
• Element will cycle on and off to maintain desired
heat setting.
3. When finished cooking turn control to OFF position.
To use both inner and outer element
1. Depress Element Size switch upward.
E LE M E N T S IZ E
2. Follow steps 2-3 above.
L A R G E
S M AL L
L A R G E
S M AL L
Haloring ® Element (ARHSC8750)
®
Haloring element is able to provide constant non cycling
power. LO setting allows excellent simmer and keep
warm capabilities.
1. Push in and turn control knob to the desired setting.
• LO through 3 should be used for food that is
prepared at less than boiling temperatures or to
simmer. When using settings LO through 3 the
element will not be illuminated.
• 4 through 5 can be used to maintain boiling in
moderate amounts of liquid.
• 6 through 7 should be used to maintain boiling or
larger amounts of food, low temperature frying and
to maintain correct pressure in a pressure cooker.
• 7 through 9 can be used to fry meat and poultry or
to maintain deep-fat frying temperatures.
• HI should be used to bring food to boiling
temperatures. When food is boiling, temperature
should be reduced to 4-7 as required.
2. When finished cooking, turn control to OFF position.
Settings
LO
Use to prepare food at less than boiling temperatures or to
simmer.
MED
Use to maintain boiling of larger amounts of food, low
temperature frying and to maintain correct pressure in a
pressure cooker.
HI
Use to bring food to boiling temperatures. When food is
boiling temperature setting should be reduced to MED
through HI.
12