Table of Contents
Advertisement
Steps bef ore using a new power
cutter.
•
Please read the operator's manual carefully.
•
Check the cutting blade's mounting, see the chapter
"Assembly".
•
Check that the cord and extension cord are intact and in
good condition.
•
Do not use a rolled up extension cord
Let your Husqvarna dealer regularly check the power cutter
and make essential adjustments and repairs.
W ARNING! Under no circumstances may the
!
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
W ARNING! Use of products which cut, grind,
!
drill, sand or shape material can generate
dust and vapors which may contain harmful
chemicals. Know the nature of the material
being worked on and wear appropriate dust
mask or respirator protection.
P ersonal protective equipment
W ARNING! You must use approved personal
!
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
•
Protective helmet
•
Hearing protection
•
Protective goggles or a visor
•
Breathing mask
•
Heavy-duty, firm grip gloves.
6 –
English
SAFETY INSTR UCTIONS
•
Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
•
Use leg-guards recommended for the material to be cut.
•
Boots with steel toe-caps and non-slip sole
•
Always have a first aid kit nearby.
Mac hine ' ' ' ' s safety equipment
This section descr ibes the machine ' s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the "What is
what?" section to locate where this equipment is positioned
on your machine.
W ARNING! Never use a machine that has
!
faulty safety equipment! Carry out the
inspection, maintenance and service
routines listed in this section.
Switc h
The po wer switch should be used to start and stop the
machine.
P ower switch lock
The po wer switch lock is designed to prevent accidental
operation of the switch. When the lock (A) is pressed in the
power switch (B) is released.
Advertisement
Table of Contents
