Operation With Dvd And Audio Cd; Playing Dvd And Audio Cd; General Features; Moving To Another Title - Sanyo DVC-2000 Instruction Manual

Operation with DVD and Audio CD

Playing DVD and Audio CD

Playback Setup
Turn on the TV and select the video input source con-
nected to the DVD+VCR.
Audio system: Turn on the audio system and select
the input source connected to the DVD+VCR.
Set the Output Source to DVD as shown in Setting
the Output Source on page 7.
Press OPEN/CLOSE (Z Z ) to open the disc tray.
1 1
Load your chosen disc in the tray, with the label
2 2
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
Press OPEN/CLOSE (Z Z ) to close the tray.
3 3
"DISC LOAD" appears in the display window, and
playback starts automatically. If playback does not
start, press PLAY (H).
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
DVD
Use b/B/v/V buttons to select the title/chapter you
want to view, then press SELECT/ENTER to start
playback.
Press TITLE or DISC MENU to return to the menu
screen.
Notes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized
(see Parental Control, on page 21).
DVDs may have a region code.
Your DVD+VCR will not play discs that have a region
code different from your DVD+VCR. The region code
for this DVD+VCR is 1 (one).
Do not keep an image or on-screen displayed for a
long time.
28
DVD CD

General Features

Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Moving to another TITLE

When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY when playback is stopped, then
press the appropriate numbered button (0-9) then
press SELECT/ENTER to select a title number.

Moving to another CHAPTER/TRACK

1
DVD CD
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press BACKWARD (.) or FORWARD (>) briefly
during playback to return to the beginning of the cur-
rent chapter/track or to select the next chapter/track.
Press BACKWARD (.) twice briefly to step back to
the previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, press v v /V V to select C
(chapter) (or for a Audio CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons (0-9). Then, press SELECT/ENTER.
Tip
In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.

Slow Motion

DVD
1 Press PAUSE/STEP (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2 Press BACKWARD (.) or FORWARD (>)
during pause mode.
The DVD+VCR will enter SLOW mode.
3 Use BACKWARD (.) or FORWARD (>) to
select the required speed: t 1/16, t 1/8, t 1/4 or
t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T
1/2 (forward).
4 To return to playback, press PLAY (H).
1
DVD
1