Table of Contents
Advertisement
Due to the different design of some mobile phones, an auto-
disconnect may happen even when the headset is powered on.
In that case, the headset will not ring when a call is coming in. Press
S1 button for 1 sec. to reconnect the headset with mobile phone for
an incoming call.
3.3.3 Mute
Press both S1 and S2 keys for one second in the same time for a Mute function.
Press S1 and S2 for one second to disable the Mute function.
3.3.4 Connect with a PC or PDA
You are allowed to connect the headset with a Bluetooth enabled PC or PDA
which has Audio Gateway Profile supported. Please refer to the user's manual
of your Bluetooth enabled PC or PDA for a setup information.
In this application, you can play music from PC or PDA to your Bluetooth
headset.
3.3.5 Low Battery
When the blue indicator stop blinking, it indicates that the headset is running
low on battery. Charge the headset for 2 hours until the RED indicator on
charger cable turning off.
8
Advertisement
Table of Contents
