Faq - Motorola BT-354 User Manual

FAQ

Does the headset work with all types of mobile phones ?
Ans : No. It works only with Bluetooth enabled mobile phones.
2. Why the headset does not work with my mobile phone after the headset is
fully charged and turned on ?
Ans : At first, you have to activate the Bluetooth function of your mobile
phone then pair it with the headset.
What is the working distance between this headset and a Bluetooth mobile
phone ?
Ans : This headset is a Bluetooth Class 2 device. The basic operating
distance of a Class 2 Bluetooth device is about 10 meters. However, it is
also depending on the environment if there is any radio interference or
obstacle around. The quality of a Bluetooth mobile phone also decide the
connection. Some mobile phones are providing less operating distance.
When my mobile phone was searching for the headset, why did several
Bluetooth devices appear on my mobile phone?
Ans : Most Bluetooth enabled mobil phones with Bluetooth function activated
can search for more than one Bluetooth device in its neighborhood. The
headset will appear as "BT headset" or "Unknown Device" on your mobile
phone after it is found by your mobile phone.
Why my mobile phone can not find the headset for pairing ?
Ans : If the headset is not in pairing mode, then your mobile phone will not
find it. Please set the headset into pairing mode, then use your mobile
phone to look for it and pair with it.
What should I do when I can not hear very well with the headset ?
Ans : Adjust the sound volume on your mobile phone, or press the S2 button
of the headset to increase volume, or check if your mobile phone is in a
good signal area.
Do I need to pair the headset with my mobile phone every time I use it ?
Ans : No. Once the Pairing is set up between two devices, they will remain
paired even when one or both devices are turned off.
10