Folder And Sub-Folders Access Control List (Acl) - Thecus N420 User Manual

These taken snapshot is only accessible though CIFS/SMB by manually type
IP address\snapshot and invisible from normal access. Also, the taken snapshot
version is read only can not be deleted under CIFS/SMB access but only click the
"Del" button showing on the screen shot above.

Folder and sub-folders Access Control List (ACL)

On the Folder screen, press the ACL button, and the ACL setting screen appear
This screen allows you to configure access to the specific folder and sub-folders for
users and groups. Select a user or a gro
choose Deny, Read Only, or Writable to configure their access level. Press the
Apply button to confirm your settings.
ACL setting
Item
Deny
Read Only
Writable
Recursive
To configure folder access, follow the steps below:
1. On the ACL screen, all network groups and users are listed in the left hand
column. Select a group or user from this list.
up from the left hand column and then
Description
Denies access to users or groups who are displayed in this column.
Provides Read Only access to users or groups who are displayed in
this colum n.
Provides Write access to users or groups who are displayed in this
column.
Enable to inherit the access right for all its sub-folders.
68
\\NAS
s.