Maintenance; Technical Data - A&D UB-512 Instruction Manual

Wrist digital blood pressure monitor
Table of Contents

Advertisement

Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you
cannot fix the problem using the troubleshooting instructions, request service from your dealer or from the A&D
service group. The A&D service group will provide technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life. However it is generally recommended to have
the device inspected every 2 years, to ensure proper functioning and accuracy. Please contact either your
authorized dealer or A&D for maintenance.
Type
UB-512
Measurement
Oscillometric measurement
method
Measurement
Pressure: 20 - 280 mmHg
range
Pulse:
40 - 180 beats / minute
Measurement
Pressure: ±3 mmHg
accuracy
Pulse:
±5%
Power supply 2 x 1.5V alkaline batteries (LR03 or AAA)
Approx. 400 measurements, when AAA alkaline
Number of
batteries are used, with pressure value of
measurements
170 mmHg at room temperature of 23°C
Wrist
circumference 13.5 - 21.5 cm
Internally powered ME equipment
Classification
Continuous operation mode
Note: Specifications are subject to change for improvement without prior notice.
EMC table information is listed on our website: http://www.aandd.jp/products/manual/medical/emc_en.pdf

Maintenance

Technical Data

Applied part Cuff Type BF
Useful life
Clinical test
EMC
Memory
Operating
conditions
Transport/
storage
conditions
Dimensions
Weight
English 15
Device: 5 years (when used six times a day)
According to ANSI / AAMI SP-10 1992
IEC 60601-1-2: 2007
Last 30 measurements for each button
+10°C to +40°C / 15%RH to 85 %RH
800hPa to 1060hPa
-10°C to +60°C / 15%RH to 85 %RH
Approx. 63 [W] x 56 [H] x 21 [D] mm
Approx. 82 g, excluding the batteries

Advertisement

Table of Contents
loading

Table of Contents