TYAN S5512 series User Manual page 60

SATA Controller Speed
Indicates the maximum speed the SATA controller can support.
[Gen1] / [Gen2] / [Gen3]
Default is [Gen3]
Serial-ATA Controller 0
Software preserve
Port 0
Enable or disable SATA Port
[Disabled] / [Enabled]
Default is [Enabled]
Hotplug
Designates this port as hot pluggable
[Disabled] / [Enabled]
Default is [Disabled]
External SATA Port
External SATA support
[Disabled] / [Enabled]
Default is [Disabled]
SATA Device Type
Indentify the SATA port is connected to Solid State Drive or Hard Disk Drive
[Hard Disk Driver] / [Solid State Drive]
Default is [Hard Disk Driver]
Spin up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization sequence
to the device.
[Enabled] / [Disabled]
Default is [Disabled]
Serial-ATA Controller 1
Software preserve
Port 1
Enable or disable SATA Port
[Disable]/[ Enabled]
Default is [Enabled]
Hotplug
Designates this port as hot pluggable
[Disabled] / [Enabled]
Default is [Disabled]
60
http://www.TYAN.com