Invacare 1514 Installation And Operating Instructions

ANTI-THEFT DEVICE
Assembly, Installation and Operating Instructions
Model No. 1514
NOTE: Check all parts for shipping damage before
using. In case of damage, do NOT use. Contact the
D e a l e r / C a r r i e r f o r f u r t h e r i n s t r u c t i o n s .

SAFETY SUMMARY

The following recommendations are made for the
installation of the anti-theft device:
WARNING
DO NOT assemble or use this equipment with-
out first reading and understanding this instruc-
tion sheet. If you are unable to understand the
warnings, cautions or instructions, contact a
healthcare professional, dealer or technical
personnel before attempting to install this
equipment - otherwise, injury or damage may
occur.
NEVER maneuver an occupied wheelchair by
using ANY part of the anti-theft device. Seri-
ous injury or damage can occur. ALWAYS use
the handles of the wheelchair when maneu-
vering an occupied wheelchair.
This kit contains the following:
DESCRIPTION
Anti-Theft Bar
Instruction Sheet
Q T Y
www.invacare.com
Invacare Corporation
USA Canada
One Invacare Way 5970 Chedworth Way
Elyria, Ohio USA Mississauga, Ontario
44036-2125 L5R 3T9, Canada
800-333-6900 905-890-8838
INSTALLING THE ANTI-THEFT
DEVICE (FIGURE 1)
1 . Remove the upper four (4) phillips screws and
washers that secure the back upholstery to the
back canes.
NOTE: Phillips screws and washers will be reused.
2 . Position the anti-theft device brackets with the
back upholstery screw holes.
3 . Install the phillips screws through the washers,
anti-theft device brackets, back upholstery and
into the back canes.
4 . Ti g h t e n t h e f o u r ( 4 ) p h i l l i ps screws securely.
Anti-Theft
Device
Back Cane
1
1
Back Upholstery
FIGURE 1 - INSTALLING THE ANTI-THEFT DE-
Invacare is a registered trademark of Invacare Corporation.
© 1999 Invacare Corporation
Form No. 84-63
Phillips Screws
and Washers
Anti-Theft
Device Bracket
VICE
Part No. 1003365 Rev D (1) 1/00