First access to Network Camera
Through direct connection by null modem cable administrators can open the default web
browser and type in 200.1.1.1 as the address and press enter. Note that 200.1.1.1 will be
the default IP address in a dial-in connection and 200.1.1.100 will be the given IP address
for the user's PC by Network Camera. The user name and password are the same as what
was entered during installation.
After successful authentication, administrators should see the motion pictures in the main
page. When using Microsoft Internet Explorer, administrators should allow a plug-in
provided by Network Camera to install additionally. For best security, administrators must
change the password on the system page of configuration immediately. After changing the
password, the browser will display the authentication window again to ask for new
password. Note that the new password will also be used in the next dialup.
To make Network Camera successfully work in dial-in and dial-out modes, follow the
28
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532