Query Status Of Digital Inputs; Set Digital Outputs; Erase Snapshots Stored In Flash Memory; Erase Logo And Graphic Buttons - Vivotek IP3111 User Manual

Query status of digital inputs

Typing "diquery" will display the status of digital input once.

Set digital outputs

To set digital output to connect NO with COMMON, type "DO=L".
To set digital output to connect NC with COMMON, type "DO=H".

Erase snapshots stored in Flash memory

Typing "erase image" will clear all snapshots saved in Flash. memory.

Erase logo and graphic buttons

Typing "erase graph" will clear all images used on the homepage. If no new images are
uploaded, the system will switch to text mode and use default images instead.

Skip installation during the next boot

Typing "lock" will inform Network Camera to fix current network settings. It need not wait
for installation during the next boot.

Reset network for new settings

Typing "unlock" will make Network Camera give up current settings and wait for
installation.

Restore factory default settings

Typing "clear" will make Network Camera restore factory settings but not restart. To
validate new settings, type "reset" to make the system restart.

Reset system

Typing "reset" will make Network Camera perform a software reset.
76
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532