Network Settings - Vivotek IP3111 User Manual

Network settings

Any change made to this page will restart the system in order to validate the changes.
Make sure every field is entered correctly before clicking on .
"Reset network at next boot", the default status is checked to avoid erroneous entries
during installation. This can be tedious having to perform software installation whenever
the Video Server starts. Therefore, once the network settings, especially the IP address,
have been entered correctly, uncheck this option. If this option is disabled, the Video
Server will boot up by the current IP address. The Video Server can automatically restart
and operate normally after a power outage. Users can run IP installer to check the IP
address assigned to the Video Server if the IP address is forgotten or using the UPnP
function provided by the Video Server (MS Windows XP provides UPnP function in the "my
network place")
41
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532