Table of Contents
Advertisement
Ž
Uplink Status
This LED is illuminated when the uplink button is pressed down.
•
Power
This LED comes on when the switch is connected to a power
supply and turned on.
Uplink Button
The location of the uplink button is shown in Figure 2-1.
•
Uplink Button
Use the uplink port with the uplink button pressed down for
connecting to a regular port of a hub or another switch.
connecting to an uplink port of a hub or another switch, any of
the switch's RJ-45 ports can be used.
Figure 2-2: LED Indicators of FNSW-8088F
FNSW-8086 / 8088F User's Guide
If
9
Advertisement
Table of Contents
