Table of Contents
Advertisement
Front Panel
The front panel of the switch has eight ports and an array of LED
indicators to provide you with instant feedback on the status of
the switch.
Figure 1: Front Panel of FNSW-8086F/ FNSW-8088F
Ports
Ports of this switch are capable of accepting 100BASE-FX with
ST interface connections. For FNSW-8086F, the two TP ports
support 10/100BASE-TX with Cat. 3, 4, 5 (100Mbps) twisted
pairs connection.
When connects to a 100BASE-TX network, the ports operate at
100Mbps in half-duplex mode and 200Mbps in full-duplex mode.
When connects to a 10BASE-T network, the ports operate at
10Mbps in half-duplex mode and 20Mbps in full-duplex mode.
With the fiber-optic port , when it connects to a 100BASE-FX
network, the ports operate at 100Mbps in half-duplex mode and
200Mbps in full-duplex mode (default).
The maximum range of a 100BASE-TX network connected to
the switch is 100 meters with Category 5 shielded twisted-pair
and unshielded twisted-pair (STP/UTP) cable. A 10BASE-T
network may range up to 100 meters with Category 3, 4, or 5
STP/UTP cable.
FNSW-8086 / 8088F User's Guide
5
Advertisement
Table of Contents
