Figure 2-1: LED & Button Indicators for FNSW-8086F
Œ
Po
t Status
r
TP Ports:
Each port has an array of six LEDs to show status information.
The LEDs are identified by a corresponding array of captions
located below the LEDs on the front panel.
LNK:
100:
TX:
FNSW-8086 / 8088F User's Guide
The link indicator is the top-left LED. It is illuminated
whenever the port is connected to another working
networked device.
The top-right LED shines whenever the switch
detects that the corresponding port is connected to
a 100BASE-TX segment.
The middle-left LED comes on when the port is
transmitting data.
7