Nicam - Samsung DVD-V 90K Instruction Manual

VCR

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Install
Please refer to page 35.
User Set
Auto Power Off : Off
Screen Messages : On
1 After pressing the MENU, press the OK or ❿ .
Result:
2 Press the corresponding
option.
3 Press the OK or ❿ to select this option.
Result:
4 Press the corresponding
User Set
is selected.
Colour System : Auto
On
5 To...
NICAM : On
Off
IPC : On
Mono mode
NICAM mode
6 On completion, press RETURN three times to exit the menu.
24
The Setup menu is displayed.
, buttons to select the User Set
❷
The User Set menu is displayed.
or buttons, until the option
NICAM
❷
Press OK or ❿, until...
Off is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
On is displayed.
On: Normally set at this position.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
2 Press the OK or ❿ .
Result: The Setup menu is displayed.
3 Press the corresponding , buttons to select the
❷
option.
4 Press the OK or ❿ buttons to select this option.
Result: The menu is displayed.
User Set
5
Press the corresponding or buttons, until the
❷
selected.
Press the Ok or ❿ buttons to select the IPC (intelligent picture
6
control) option.
When intelligent picture control mode is
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the
❷
IPC mode OFF .
8 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9
On completion, press the RETURN button again.
Intelligent Picture Control ( Remote Control )
1 During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2 Press the button to turn the IPC (Intelligent Picture Control)
❷
option ON and OFF .
When Intelligent Picture Control mode is
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode OFF .
The horizontal picture adjusting appears.
4 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
5
On completion, press the IPC button again.
Install
User Set
Auto Power Off : Off
Screen Messages : On
User Set
IPC option is
Colour System : Auto
NICAM : On
IPC : On
ON , the sharpness
button to turn the
OK
ON , the sharpness
1
VCR
User Set
On
Off
VCR
25