Playback Usb Device - Teac PD-H380 Owner's Manual

5 Press the play button (y) to start playback.
Disc playback starts from the first track/file.
Audio CD
current track number
MP3/WMA disc
current folder number
< MP3/WMA files recorded out of folders are automatically put in
the "ROOT"' folder, and playback starts from the first file of the
ROOT folder.
< If there are folders that has no MP3/WMA file, this unit skips them.
< During playback of MP3/WMA file, "file name_artisit_Album" is
scrolled across the display.
< The unit stops automatically when playback of all the tracks/files
has finished.
< If you load a disc, and then press the PLAY button (or the numeric
buttons of the remote control unit) without having first closed
the disc tray, the disc tray closes and playback starts.
elapsed time of the current track

Playback USB device

1
This unit can not play the files in a mass storage hard disk.
1 Press the STANDBY/ON button to turn the unit on.
2 Select "USB" by pressing the USB/CD button.
"Not connected " will be displayed if no USB device is connected.
3 Connect a USB memory device to the USB port on the front
panel of the unit.
Playback starts from the first file.
< Keep the protective cap supplied to protect the USB port when it
is not in use.
< It may take several minutes to load the USB memory device
depending on the number of files and folders.
< If an iPod shuffle is connected to this port, it can not be played.
< MP3/WMA files recorded out of folders are automatically put in
the "ROOT"' folder, and playback starts from the first file of the
ROOT folder.
< If there are folders that has no MP3/WMA file, this unit skips them.
< During playback of MP3/WMA file, "file name_artisit_Album" is
displayed scrolling.
< When the playback of all the tracks/files has finished, the unit
stops automatically.
When the STOP button (H) is pressed, the display shows the total
number of files.
3 2
total number of files
11