STEP#3:
Lay Grill base on its back . Unwrap
MOUNTING BRACKET
holes in bottom of auger box and secure to base with (4)
3/8 hex ½" long screws
to ensure that it spins without rubbing when mounted.
STEP#4:
Plug combustion fan into
receptacle with orange
and white wire coming
from the control board
wire harness.
STEP#5:
Attach swivel caster wheels to both short legs using
(2) 1/4-20 screws and flange nuts for each swivel wheel.
. Locate mounting holes of bracket over (4)
NOTE: check blade after installation
COMBUSTION FAN ASSEMBLY &
Locate fan motor
assembly with bracket
over auger opening