Royal RG1000 Owner's Manual page 19

SMOKING
Smoke Control
Set the cook control switch to smoke. Use the smoke control switch to manually select the auger fuel feed rate.
The control displays the grill's current temperature.
Smoke sequence once the ignition sequence is complete and the igniter turns off , the auger delivers fuel at a
constant rate determined by the smoke setting (P0 - P15).
Smoke Setting
The smoke fuel feed rate is the rate the auger delivers fuel while the grill is operating in the smoke mode. In smoke
mode, manually adjust the fuel feed rate using the smoke control switch to establish the desired temperature
and/or smoke output See "Understanding Idle Fuel Feed Rate and Smoke Settings" for more information.
Low Temperature
If the grill temperature is less than 110 degrees, the displayed temperature fl ashes, indicating a low temperature.
This is not an error condition and does not aff ect the operation of the grill. The fl ashing display is designed to
alert the operator that there is some risk of the fi re going out.
High Temperature
If the grill temperature is greater than 615 degrees, a fl ashing "ErH" is displayed indicating a high limit error and the
grill shuts down. Refer to the "Error Modes and Messages" section for details.
UNDERSTANDING IDLE FUEL FEED RATE & SMOKE SETTINGS
Smoke Control Switch
The smoke control switch sets the fuel feed rate (the amount of fuel delivered in a given period of time) when the grill
is operating in smoke mode and when the grill is idling in cook mode.
During cook idle or smoke mode, the auger turns on, delivers fuel for 15 seconds, then turns off . The off time is set by
the smoke control switch.