Avery Dennison Monarch 9825 Operator's Handbook Manual page 42

To change the setting, from the Main Menu, select Setup, Supply, then
Positioning. Then, follow these steps.
1. Press or
POSITIONING
Print Pos
2. Press Enter/Pause. The current setting is displayed, for example:
Enter print pos
[-99/99]: +0
3. Press or
value (moves the image down);
4. Press Enter/Pause when the number you need appears. Press
Escape/Clear until you see the Main Menu.
4-8 Operator's Handbook
until you see
to change the print position. Pressing
increases it (moves the image up).
decreases the