System Requirements; Recording With A Dv Connection Cable - Samsung SCD101 Owner's Instruction Book

ENGLISH
IEEE 1394 Data Transfer
G System requirements
I
CPU : faster Intel ® Pentium III™ 450Mhz compatible.
I
Operating system : Windows
I
Main memory : more than 64 MB RAM
I
IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable

1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied)
from the DV jack of the camcorder to
the DV jack of the other DV device.
I
Make sure that DV IN appears on
the screen.
3. Press the START/STOP button to begin
REC PAUSE mode.
I
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the
picture.
5. Press the START/STOP button to start recording.
I
If you want to pause recording momentarily, press the
START/STOP button again.
6. To stop recording, press the
Notes
I
When using this camcorder as a recorder, the pictures that
appear on a monitor may seem uneven, however recorded
pictures will not be affected.
I Operations are not guaranteed for all the recommanded
computer environments mentioned above.
78 78
® 98SE, ME, XP, Mac OS (9.1~10.2)
(STOP) button.
G
I CPU: Intel Pentium III™ 450Mhz
®
I
Windows ® 98SE, ME, XP, Mac OS(9.1~10.2)
I
64MB RAM
I
IEEE 1394
USB DV
AUDIO
/VIDEO
S-VIDEO
MIC
I
I
I
I
I