Adjusting The Lcd During Play; Controlling Sound From The Speaker - Samsung SCD101 Owner's Instruction Book

ENGLISH
Basic Recording

Adjusting the LCD during PLAY

✤
You can adjust the LCD during playback.
✤
The adjustment method is the same procedure as used in
CAMERA mode. (see page 32)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.
I
When you use the LCD screen for playback, you
can hear recorded sound from the built-in Speaker.
- Follow the instructions below to decrease or
mute speaker volume in the PLAYER mode.
- Take the following steps to lower the volume or
mute the sound while playing a tape on the
camcorder.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play,
use the MENU DIAL to adjust the volume.
I
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between
00 to 19 and you will not hear any sound when
the volume is set on 00.
I
If you close the LCD while playing, you will not
hear sound from the speaker.
Notes
I When the cable is connected to the Audio/Video
jack, you cannot hear sound from the speaker and
cannot adjust the volume.
I
You can hear sound from speaker by removing the connected
cable from the Audio/Video jack.
✤
✤
2
3-1
VOL/MF
<3-2>
0 : 2 3 : 4 7
5 5 min
VOL. [ 1 1 ]
1 2 : 0 0 A M
J A N . 1 0 , 2 0 0 4
I
I
I
I
I
35 35