Date/Time; Tv Display - Samsung SCD101 Owner's Instruction Book

ENGLISH
Advanced Recording
G DATE/TIME
✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC
and M.PLAY modes.
✤ The date and time are automatically recorded on a special
data area of the tape.
1. Press the MENU button.
I
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and
press the ENTER button.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the ENTER button to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
I
You can choose to display - the OFF, DATE,
TIME, DATE/TIME
- OFF only
- DATE only
- TIME only
- DATE & TIME
I
To return to the previous menu, highlight the
DATE/TIME in the middle of OSD and
press the ENTER button.
6. To exit, press the MENU button.
Notes
I
The DATE/TIME is not affected by the OSD ON/OFF
(DISPLAY) button.
I
The DATE/TIME will read "- - -" in the following
conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the
Camera's memory.
- When the lithium battery becomes weak or dead.
I Before you use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 39.
G
✤
✤
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER LCD ADJUST
DATE / TIME

TV DISPLAY

CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME
I
I
I
I
I
I
53 53